Racing Electronics

[Company Logo Image] Performance Trends Inc

Producing Quality Computer Tools for Racers and Engine Builders since 1986

Computer Electronics to Analyze many types of Racing needs.

Dyno Data Loggers - Performance Trends has been making dynamometer data loggers since 1995. Engine builders have been using them on both chassis and engine dynos, either inertia or absorber (water brake, hydraulic, eddy current) dynos, or some combination of the 2. From 0.5 RC car engines to 2500 HP blown alcohol engines, we've done them all. We can retro-fit SuperFlow (tm), Clayton (tm), Stuska (tm), Go Power (tm), Land &Sea (tm), Froude (tm), Davenport (tm), Prototype (tm), and many other types of DIY (do it yourself) dynos.

Data Loggers - Performance Trends has been making vehicle data loggers since 1990. Racers have been using them to record and improve their drag racing, circle track, road racing, and even street cars, karts, and motorcycles.

Flow Bench Electronics For over 20 years, we've been providing "do it yourself" flow bench kits like our EZ Flow, and packages to computerize most any type of flow bench, including

SuperFlow (tm), Saenz (tm), JKM (tm), or most any custom or DIY (do it yourself) bench. Our accessories lets you get the most out of your flow bench testing, and greatly improve the speed and accuracy of the results.

Air Fuel Sensor We provide wide band O2 systems to monitor A/F from gas and alcohol engines. We also have a line of accessories to enhance their operation and features.

Thermocouple Recorder We provide a 4 channel type K thermocouple amplifier that can be used by our DataMite data loggers, or most any other data logger. This logger can be used stand alone and record directly to a computer using our exclusive, free software.

Thermocouple Amplifier We provide a very affordable 2 channel type K thermocouple amplifier that can be used by our DataMite data loggers, or most any other data logger.

Strain Gauge Load Cell Amplifier

We provide a very affordable strain gauge load cell amplifier. This can be used with our DataMite data loggers, or most any other logger. It is powered by 5 VDC and produces a 0-4.5 volt output signal.

Infa Red Tire Temperature Sensor

We now have a very affordable Infa Red Tire Temperature Sensor that can be used with our DataMite data loggers, or most any other logger. It is powered by 5 VDC and produces a 0-4.5 volt output signal.

Power Tech Spring Tester Upgrade - If you own a Power Tech (tm) spring tester, we can provide a kit of software and electronics to go USB and provide expanded features in the software, including better accuracy.